HOME > Wall Soundproofing

Independent Wall System

Thickness +/-165mm – Compatible with Brick and Stud Walls

Independent Wall System

Thickness +/-165mm – Compatible with Brick and Stud Walls

This solution significantly improves on airborne and impact noise been transmitted between two properties whilst also providing some improvement to thermal insulation. Around 6.5 inches of wall space will be used for this solution. This solution consists of a new timber frame, fitted with an air gap between existing party wall and new timber frame, 100mm RS60 Rockwool, resilient bars, 19mm sound plank (or the recommended 15mm DB Board) and a 12.5mm sound shield acoustic plaster board.

Phonestar DB Boards

The DB Board is a high-density sand filled board which can help to reduce Airborne noise through walls. These boards are 15mm thick and have a corrugated sand filled carcass. The DB board has both soundproofing and thermal properties (on timber or steel framed structures).

Mass Loaded Vinyl (MLV50)

This a 2.5mm thick rubber sheet adding 5kg per square meter. The membrane is made from recycled materials and works as an excellent barrier to airborne noise.

Green Glue

Green Glue is layered between the two layers of board. The science behind green glue is that when soundwaves hit the glue, it disperses these vibrations into smaller vibrations within the boards. These then shear along the two sides of the boards, causing friction and the glue to changes these vibrations into heat. The heat dissipates, which reduces the vibration. This conversion of energy from sound vibration to heat is called damping and this is what lays at the core of this product

[email protected]

0800 152 2234

Menu

Independent Wall System

Independent Wall System

Check out our other Sound Proofing Systems!

Batten Wall System

Genie Clip Wall System

Address

Opening Hours

Get in Touch

0800 152 2234

[email protected]

0800 152 2234

[email protected]